www.instrument.com - Saturday, March 13, 2010
Printer-friendly version of the page "EDAS-2005M Digital Output (FET) - 2 different models"
(URL: http://edasce.com/.html)

EDAS-2005M Digital Output Modules

EDAS-2005M Digital Output Module

There are two FET digital output modules, both capable of switching DC signals, EDAS-2005M-1 and EDAS-2005M-2.

The EDAS-2005M-1 digital output module is capable of switching up to 24 VDC digital outputs.

The EDAS-2005M-2 high-voltage digital output module is capable of switching up to 360 VDC digital outputs.

Click here to request more information about the EDAS CE system

EDAS-2005M-1 Digital Output Module

The EDAS-2005M-1 Digital Output Module provides 12 channels of open drain, 24 VDC digital outputs. The 12 channels are arranged as two ports. Port 0 has 8 channels and Port 1 has 4 channels. This module supports read back allowing the software to determine the output’s present state. Each channel has a hardware switch that determines the channels power-on state. An 8-position and a 4-position switch sets the initial data on these channels. When a switch is in the on position during the power-up reset, the corresponding channel will be turned on.

The digital outputs have 500 V channel to channel isolation with one return per channel. The module provides 1500 V input to output isolation.

Click here to request more information about the EDAS CE system

EDAS-2005M-1 Digital Output Module Specifications

Parameter	Conditions	Specifications
Digital Output		12 Outputs, 24VDC
	On Resistance	.03 ohms typ.
	On Current	500mA
	On Voltage	0.8VDC max.
	Off Voltage	27VDC max.
Isolation	Channel - Channel	500V
	Input to Output	1500V
Current Consumption	5VDC	160 mA max
Dimensions	Inches	4.55D x 5.9H x 1.74W
	mm	116D x 150H x 42W
Operating Temperature Range		0 to 60° C^*
^*All specifications are typical at 25° C unless otherwise noted. Maximum voltage or current are dependent on power dissipation. Please contact support for particular current/voltage operating points.

EDAS-2005M-2 High Voltage Digital Output Module

The EDAS-2005M-2 High Voltage Digital Output Module provides 12 channels of open drain, 360 VDC digital outputs. The 12 channels are arranged as two ports. Port 0 has 8 channels and Port 1 has 4 channels. This module supports read back allowing the software to determine the output’s present state. Each channel has a hardware switch that determines the channels power-on state. An 8-position and a 4-position switch sets the initial data on these channels. When a switch is in the on position during the power-up reset, the corresponding channel will be turned on.

The digital outputs have 500 V channel to channel isolation with one return per channel. The module provides 1500 V input to output isolation.

Click here to request more information about the EDAS CE system

EDAS-2005M-2 Digital Output Module Specifications

Parameter	Conditions	Specifications
Digital Output		12 Outputs, 360VDC
	On Resistance	5 ohms typ.
	On Current	260mA
	On Voltage	2VDC max.
	Off Voltage	360VDC max.
Isolation	Channel - Channel	500V
	Input to Output	1500V
Current Consumption	5VDC	160 mA max
Dimensions	Inches	4.55D x 5.9H x 1.74W
	mm	116D x 150H x 42W
Operating Temperature Range		0 to 60° C^*
^*All specifications are typical at 25° C unless otherwise noted. Maximum voltage or current are dependent on power dissipation. Please contact support for particular current/voltage operating points.

Digital Module Overview

EDAS-2002M Digital I/O

This module provides 8 input and 4 output channels. Each channel can be configured with advanced functions, like counter, state-of-change detector, rate and puls generator

EDAS-2004M Digital Input - 4 different models

16 channel digital input module with input levels of 5, 24, 120 or 240 volts

EDAS-2005M Digital Output (FET) - 2 different models

There are two FET digital output modules. Module EDAS-2005M-1 provides 12 digital outputs for 24 volt levels. FET outputs capable of switching to 24 volts or ground (PNP/NPN). Module EDAS-2005M-2 provides 12 digital outputs for 360 volt levels. FET outputs capable of switching to 360 volts or ground (PNP/NPN)

EDAS-2010M Relay Output

12 SPST relay output channels, capable of switching 2A at 240 VAC or 30 VDC

EDAS-2011M Triac Output

12 channels with Triac outputs, capable of switching AC signals up to 2 A with voltage levels from 24 VAC to 250 VAC.

Module Overview

CPU

CPU Modules for the EDAS CE Automation & Control System

Remote Analog I/O - EDASce Analog input module

Analog input modules provide 16 channels each and accept voltage, 4-20 mA and thermocouple signals. Sampling speed up to 200 kHz are ideal for vibration and acoustic applications

Ethernet I/O Data Acquisition: Analog Output Module

Analog output modules provide 8 channels each with +/-10 volts

Digital I/O

A wide range of modules for various voltage ranges, FET or relay output. Special functions: counter, pulse-generator, change-of-state detection; all modules provide channel to channel isolation

Quadrature Decoder, Counter

This 2-channel quadrature decoder and high-speed counter module can be used with shaft encoders or as a high-speed up/down counter

Serial Communication

Serial communication modules provide 4 channels of RS232, with up to 25 serial ports per system

Power Supply

Power supply modules for the EDAS CE offer a wide range of input voltage and auxiliary outputs for additional equipment

EDASce Ordering Information

Pricing for all EDASce hardware and modules