• Specifications

    Highly configurable for large systems.

    Learn More
    Slide 1
  • Accessories

    Supports up to 12 I/O modules.

    Learn More
    Slide 2
  • Downloads

    View and download the user manual.

    Learn More
    Slide 3

EDAS-2000


The EDAS CE Base System consists of a Power Module and a CPU Module. Up to 12 I/O Modules in any configuration and combination can be attached to the CPU Module. Since each I/O module can offer up to 16 channels, systems with up to 192 channels can be configured. For even larger systems multiple EDAS CE units can be used that communicate with each other through Ethernet. Communication between the CPU and the modules is achieved through an enhanced PC/104 bus. During boot time the hardware configuration and combination of modules is automatically detected.

Each module is housed in a robust aluminum enclosure. They are mounted on standard DIN-rails. I/O connections for the channels are provided on detachable screw terminal blocks located on the bottom of the modules.

All modules are isolated from the system bus up to 1,500 volts. Additionally the digital I/O Modules offer a 500 volts channel to channel isolation.

The EDAS CE can capture analog signals at up to 200 kHz, which is much faster than a typical PLC. This makes the EDAS CE suitable for applications such as vibration monitoring and sound analysis.

Photos and descriptions of each individual module can be found in the "Accessories" section of this page.

Specifications

Power Requirements

  • 1A: 90-260VAC input, 5V, 10A output
  • 2A: 90-260VAC input, +5 and +12VDC accessory power
  • 3A: 90-260VAC input, +5 and +24VDC accessory power
  • 80 character display buffer
  • Display can flash and blink
  • Font supports underscore and block

Digital I/O

  • 8 digital inputs 24VDC
  • 4 digital outputs 24VDC
  • Inputs can be configured as counters or latches
  • Outputs can be configured for pulse or squarewave
  • Used with the EDAS-2002M-1 module

Analog Input

  • 1A 16/8 SE/Diff channels, 12-bit, Programmable gain (1,10,100), Voltage, Current
  • 2A has 16/8 SE/Diff channels, 200KHz, 12-bit, Programmable gain (1, 10, 100), Voltage, Current
  • 3A has 16/8 SE/Diff channels, 200KHz, 12-bit, Programmable gain (1, 10, 100), Voltage, Current
  • Thermocouple, Built in CJC
  • Used with the EDAS-2003M module

Accessories

EDAS-2001E-1A/2A/3A

EDAS-2001E-1A/2A/3A

Power supply module

EDAS-2002M-1

EDAS-2002M-1

Digital I/O module, 8 digital inputs 24VDC, 4 digital outputs 24VDC

EDAS2003M-1A/2A/3A

EDAS2003M-1A/2A/3A

Analog input module

EDAS-2004M-1/2/3/4

EDAS-2004M-1/2/3/4

Digital input module, 16 channels, 24/120/240/5VAC/DC

EDAS-2005M-1/2

EDAS-2005M-1/2

Digital output module: 1 has 12 channels, 24VDC, FET outputs; 2 has 12 channels, 360VDC

EDAS-2006M-1

EDAS-2006M-1

Analog output module, 8 channels, 0-10V

EDAS-2008M-1

EDAS-2008M-1

Serial port module, 4 RS-232 serial ports

EDAS-2010M-1

EDAS-2010M-1

Relay output module, 12 channels, 2A @ 240V

EDAS-2011M-1

EDAS-2011M-1

Digital output module, 12 channels, 240V 2A max

EDAS-2015M-1

EDAS-2015M-1

Quadrature decoder and high speed counter module

EDAS-1018A-1

EDAS-1018A-1

Operator interface cable, for use with TM2500 microterminals. RS-232, DE-9 male to DE-9 female, 3 meters

EDAS-1024A-1

EDAS-1024A-1

Industrial EDAS enclosure

LPP002

LPP002

24VAC power supply (90-120VAC input)

LPP003

LPP003

24VAC power supply (90-120VAC input)

LPA015

LPA015

Data Transfer Cable, RS-232, DE-9 (AT) and DB-25 (XT)

EDAS-1028A-1

EDAS-1005A-1

DIN-rail mounting kit for EDAS-1001E and EDAS-1002E Ethernet data acquisition systems. Includes aluminum strap and mounting screws.

EDAS-1028A-1

EDAS-1028A-1

Rack-mount kit, 19-inch, for EDAS-1001E, EDAS-1002E and EDAS-1031E systems. Includes 1U-size rack-mount and overlays for installation of up to 3 EDAS units.

Downloads

EDAS CE Software Manual

User manual for the EDAS CE.